Janus-1613
Ref: Janus-1613
8 sided. Call for current price!
Max temp 2350 - Cone 10
Firing Chamber 16 1/2 W x 13 1/4 D
1.75 cu ft
The new Paragon Janus-series kilns can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.
Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10 (2350°F). You can also fire several shelves of smaller glass pieces using the pottery mode.
The elements in the lid/roof are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.
Features
* Digital Sentry 2.0 controller includes Cone-Fire mode with programmed slow cooling and 18-Segment Ramp-Hold mode. Manufactured by the Orton Ceramic Foundation exclusively for Paragon.
* Glass/pottery selection switch
* 3" insulating refractory firebrick walls
* Sidewall elements in dropped, recessed brick grooves are easy to replace.
* Tapered peepholes for a wide view
* A steel floor pan supports the entire brick bottom of each kiln.
* One year limited warranty
* Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase.
* Since Janus kilns are designed for porcelain, they also easily fire ceramics,
Price: $1,193.00 each
